徐州INA轴承GE40HO-2RS调心系列安配事项

调心滚子轴承是徐州INA轴承精*密零件，**须小心使用。采用高性能调心滚子轴承代替。如果使用不当，则无法达到预期的性能结果。因此，使用调心滚子轴承时应注意以下几点：

Self-aligning roller bearings are precise and dense parts of Xuzhou INA bearings, which should be carefully used. High performance self-aligning roller bearings are used instead. If used improperly, the expected performance results can not be achieved. Therefore, the following points should be paid attention to when using self-aligning roller bearings:

保持调心滚子轴承及其周围环境清洁。通过触摸轴承上的钢印，可以更快、更准确地识别轴承。如果你用手碰它，***就不会碰了，但你可以用钉子轻轻地碰它。轴承具有较高的额定负载和较低的噪声，大大降低了维护成本，延长了机器的运行时间。即使无形灰尘进入调心滚子轴承，也会增加调心滚子轴承的磨损、振动和噪音。

Keep the self-aligning roller bearing and its surrounding environment clean. By touching the steel stamp on the bearing, the bearing can be recognized more quickly and accurately. If you touch it with your hand, the stamp won't touch it, but you can touch it gently with a nail. Bearing has higher rated load and lower noise, which greatly reduces the maintenance cost and prolongs the running time of the machine. Even if the invisible dust enters the self-aligning roller bearing, it will increase the wear, vibration and noise of the self-aligning roller bearing.

使用和安装徐州INA轴承时要小心。不允许硬冲压。不允许锤子直接撞击调心滚子轴承。不允许压力通过汽包。

Be careful when using and installing Xuzhou INA bearings. Hard stamping is not allowed. The hammer is not allowed to directly impact the self-aligning roller bearing. Pressure is not allowed to pass through the drum.

使用合适的、准确的安装工具，尽量使用专用工具，尽量避免使用布和短纤维等物品。

Use appropriate and accurate installation tools, try to use special tools, try to ***oid using cloth and staple fibers and other items.

为了防止调心滚子轴承的腐蚀，直接用手握住调心滚子轴承时，应将手上的汗液彻底清洗干净，然后在操作前涂上优*质矿物油。雨季和夏季，应特别注意徐州INA轴承防锈。

In order to prevent the corrosion of the self-aligning roller bearing, when holding the self-aligning roller bearing directly by hand, sweat on the hand should be thoroughly cleaned and then coated with high quality mineral oil before operation. In rainy season and summer, special attention should be paid to the anti-rust of Xuzhou INA bearing.

调心滚子轴承的配合：

Coordination of self-aligning roller bearings:

滚动调心滚子轴承的内外径按标准公差制造。只有控制轴颈和座孔的公差，才能实现调心滚子轴承内圈和轴、外圈和座孔的紧密性。当轴承识别出轴承的真假时，通过触摸轴承上的钢印，可以更快、更准确地识别徐州INA轴承。如果你用手触摸***，你就不会触摸它，但是你可以通过触摸***的钉子来感受它。调心滚子轴承内圈与轴的匹配采用基孔系统，调心滚子轴承外圈与座孔的匹配采用机轴系统。

The inner and outer diameters of rolling self-aligning roller bearings are manufactured according to standard tolerances. Only by controlling the tolerance of journal and seat hole can the tightness of inner ring and shaft, outer ring and seat hole of self-aligning roller bearing be realized. When bearing recognizes the true or false of bearing, it can recognize Xuzhou INA bearing more quickly and accurately by touching the steel mark on the bearing. If you touch the stamp with your hand, you won't touch it, but you can feel it by touching the nail of the stamp. The matching of inner ring and shaft of self-aligning roller bearing adopts base hole system, while the matching of outer ring and seat hole of self-aligning roller bearing adopts machine shaft system.

在选择合适的配合时，很难了解调心滚子徐州INA轴承的实际载荷和工作温度。因此，大多数案例都是基于运用集约研究来选择合作。

It is difficult to know the actual load and working temperature of Xuzhou INA bearing with adjusting roller when choosing suitable matching. Therefore, most cases are based on the use of intensive research to choose cooperation.

文章来自：徐州SKF轴承 www.wh-skf.com

Article from: Xuzhou SKF Bearing www.wh-skf.com

文章来自：徐州INA轴承 www.ina-china.cn

Article from: Xuzhou INA Bearing www.ina-China.cn

文章来自：徐州NSK轴承 www.klbbearings.com

Article from: Xuzhou NSK Bearing www.klbbearings.com

***：524085168

电话：0510-81207777

手机：13311666672/13395185757